1994~1996  南京航空航天大学智能材料与结构研究所   博士后；

1996~2002  北京航空材料研究院先进复合材料国防重点实验室  高级工程师、研究员、专业组长；

2002~2003  香港大学、日本九州大学  访问研究员；

2003 至今   北京交通大学机电学院  教授。

• 陶瓷基及金属基复合材料
• 载运工具新材料科学与技术
• 材料先进成形工艺
• 材料表面技术及功能材料
• 先进钢铁材料
• 材料工程

• 载运工具运用工程博士
• 材料科学与工程硕士
• 材料工程硕士
• 材料工程博士

1. 国家自然科学基金“面上”:  高导热铁尾矿多孔陶瓷及其相变复合材料的设计、制备与性能研究, 2019--2022，主持
2. 国家自然科学基金“面上”:  双连续梯度复合高铁制动材料的制备及其服役行为研究, 2015-2018，主持
   
3. 国家自然科学基金 “面上” ：Ti3AlC2增强锌基复合材料的界面结构与摩擦学特性研究，2012--2015，主持
4. 国家自然科学基金 “面上” ：多元掺杂锰酸镧陶瓷的相变及红外发射特性研究，2010--2012，主持
5. 国家自然科学基金 “面上” ：Ti3SiC2-Cu新型真空触头材料电接触特性及失效机理研究，2007--2009，主持
6. 留学回国人员基金：高性能层状陶瓷复合材料的设计、制备及其性能影响因素研究，2005--2007，主持
7. 科技部“863”：高速铁路接触网线与受电弓滑板及其适配性研究，2006--2009，参加
8. 科技部“973”：高速弓网载流滑动失效机制与材料设计，2007--2011，参加
9. 科技部“科技支撑”：高速弓网接触副研究，2009--2012，参加
10. 北京市教委：科研项目-北京实验室-高铁制动盘用耐热合金及复合材料研究（改革试点）（协同创新中心），2013--2014，参加
11. 红果园：专项任务，2006--2008，240.0万元，参加

本科生：工程材料、创新工程与实践

硕士生：材料现代分析方法

博士生：材料现代分析与检测方法

2021年

1.     Chen Zhang, Yang Zhou*, Hongrui Liu, Junping Li*, Kefei Lu, Yuan Li. Influence of pyrolytic carbon interphase and pyrolysis temperature on the mechanical and tribological properties of Cf/SiC after heat treatment at 1800 °C. Ceramics International, 2021, 47: 16282~16293 (SCI, WOS: 000640986200001)

2.     Gao Wen, Zhou Yang*, Han Xiaonan, Li Shibo, Huang Zhenying. Preparation and microstructure of 3D framework TiC-TiB₂ ceramics and their reinforced steel matrix composites. Ceramics International, 2021, 47: 2329~2337 (SCI, WOS: 000597810100002)

3.     Liu Xiaoqian, Zhou Yang*, Liu Xufeng, Li Runfeng, Li Shibo, Li Cuiwei. SiC-based porous ceramic carriers for heat-conductive phase change materials through carbothermal reduction method. International Journal of Applied Ceramic Technology, 2021, 18: 91~99 (SCI, WOS: 000578987600001)

4.     Cong Lei, Yang Zhou, Hongxiang Zhai*, Zhenying Huang, Wenqiang Hu, Leping Cai, Yuanbo Wang, Qun Yu, Hongjie Wang. Thermal shock behavior of co-continuous TiCx-Cu cermets in air and anaerobic environment. Ceramics International, 2021, 47: 16422~31 (SCI, WOS: 000648866500001)

5.     Hai-Yan Li, Yuan Tian, Detian Wan, Yiwang Bao, Yang Zhou*. Effect of thermal stability of M_n+1AX_n phases on microstructure and mechanical properties of M_n+1AX_n/ZA27 composites. Int. J. Appl. Ceram. Technol., 2021, 18:1213~1221 (SCI, WOS: 000635960100001)

6.     Weimin Xu, Shibo Li, Weiwei Zhang, Bo Ouyang, Wenbo Yu, Yang Zhou. Nitrogen doped Ti₃C₂T_x MXene induced by plasma treatment with enhanced microwave absorption properties. ACS Appl. Mater. Interfaces, 2021, 13: 49242~49253

2020年

7.     Zhang Chen, Liu Hongrui, Zhou Yang*, Li Junping*, et al. The effect of high temperature heat treatment on the tribological property of a carbon fiber pyrolytic carbon-silicon carbide composite. Ceramics International, 2020, 46: 4493~4501 (SCI, WOS: 000512219600056)

8.     Li Runfeng, Zhou Yang*, Duan Xili*. Nanoparticle enhanced paraffin and tailing ceramic composite phase change material for thermal energy storage. Sustainable Energy & Fuels, 2020, 4(9): 4547~4557 (SCI, WOS: 000563991800016)

9.     刘晓倩, 周洋, 刘旭锋, 张永辉, 李世波. 碳热还原法制备铁尾矿多孔陶瓷的结构与性能. 矿产保护与利用, 2020, 40(3): 56~63

2019年

10.   Li Runfeng , Zhou Yang*, Duan Xili*. A novel composite phase change material with paraffin wax in tailings porous ceramics. Applied Thermal Engineering, 2019, 151: 115~123 (SCI, WOS: 000463122900011)

11.   Li Runfeng, Zhou Yang*, Li Cuiwei, Li Shibo and Huang Zhenying. Recycling of industrial waste iron tailings in porous bricks with low thermal conductivity. Construction and Building Materials, 2019, 213: 43-50 (SCI, WOS: 000471084500005)

12.   Lei Cong, Zhai Hongxiang, Huang Zhenying, Hu Wenqiang, Cai Leping, Chen Siyu, Yu Wenbo and Zhou Yang. Fabrication, microstructure and mechanical properties of co-continuous TiCx/Cu-Cu₄Ti composites prepared by pressureless-infiltration method. Ceramics International, 2019, 45 (7): 2932~2939 

13.   蒋三生, 周洋. 一种卫星导航天线罩凝胶成型模具的设计与3D打印. 陶瓷学报, 2019, 40 (2): 217~222

14.   Jiang Jipeng, Li Shibo, Zhang Weiwei, Yu Wenbo and Zhou Yang. In situ formed TiCx in high chromium white iron composites: Formation mechanism and influencing factors. Journal of Alloys and Compounds, 2019, 788: 873~880

15.   Jiang Jipeng, Li Shibo, Yu Wenbo and Zhou Yang. Microstructural characterization and abrasive wear resistance of a high chromium white iron composite reinforced with in situ formed TiCx. Materials Chemistry and Physics, 2019, 224: 169~174

16.   Lu Xiaogang, Li Shibo, Zhang Weiwei, Yu Wenbo and Zhou Yang. Thermal shock behavior of a nanolaminated ternary boride: MoAlB. Ceramics International, 2019, 45: 9386~9389

17.   Lu Xiaogang, Li Shibo, Zhang Weiwei, Yao Boxiang, Yu Wenbo, Zhou Yang. Crack healing behavior of a MAB phase: MoAlB. J Euro Ceramic Soc, 39 (2019) 4023-4028

18.   Hu Shujun, Li Shibo, Xu Weimin, Zhang Jing, Zhou Yang, Cheng Zhenxiang. Rapid preparation, thermal stability and electromagnetic interference shielding properties of two-dimensional Ti₃C₂ MXene. Ceramics International, 2019; 45: 19902-19909

2018年

19.   Zheng Yong, Zhou Yang*, Feng Yide, et al. Synthesis and mechanical properties of TiC-Fe interpenetrating phase composites fabricated by infiltration process. Ceramics International, 2018, 44: 21742~21749 (SCI, WOS: 000448226900146)

20.   李润丰, 周洋*, 郑涌, 孙智勇, 李翠伟, 黄振莺. 烧结温度对铁尾矿多孔陶瓷结构及性能的影响. 稀有金属材料与工程, 2018, 47 (Suppl.1): 103~107  (EI, Accession number: 20191506766063)

21.   Li Haiyan, Zhou Yang*, Cui Ao, Li Shibo, Huang Zhenying and Zhai Hongxiang. Effect of Ti₃AlC₂ Content on Mechanical Properties of Ti₃AlC₂/ZA27 Composites. Rare Metal Materials and Engineering, 2018, 47(4): 1069-1074 (SCI, WOS: 000431601500009 )

22.   李润丰, 周洋*, 李世波, 李翠伟, 黄振莺. 北京地区细颗粒铁尾矿烧结过程与机理研究. 建筑材料学报, 2018, 21 (4): 672~677 (EI, Accession number: 20184305980479)

23.   蒋三生, 周洋. 基于凝胶注模成型的Si₃N₄/Si坯体制备及性能分析. 陶瓷学报, 2018, 39 (3): 322~326

2017年

24.   Zheng Yong, Zhou Yang*, Li Runfeng, Wang Jiaqi, Chen Lulu, Li Shibo. Preparation and Mechanical Properties of TiC-Fe Cermets and TiC-Fe/Fe Bilayer Composites. Journal of Materials Engineering and Performance, 2017, 26 (10): 4933~4939 (SCI, WOS: 000413117700029)

25.   郑涌, 周洋*, 王嘉琪, 李鸿宇, 李世波, 黄振莺, 李翠伟, 翟洪祥. 高体积含量TiC/Fe复合材料的制备及力学性能. 稀有金属材料与工程, 2017, 46 (9): 2673~2678 (SCI, WOS: WOS: 000435226100059)

26.   赖建宏, 周洋*, 郑涌, 王嘉琪, 黄振莺, 李世波, 翟洪祥. 双连续TiC/Fe复合材料的制备和性能. 材料研究学报, 2017, 31 (10): 743~750 (EI, Accession number: 20174904504165)

27.   Hu Shujun, Li Shibo, Li Haolin, Zhou Yang. Large-scale growth of TiB₂ hexagonal platelets. Journal of Alloys and Compounds, 2017, 690: 930~935

28.   Li H L, Li S B, Mao H, Zhou Y. Synthesis and mechanical and thermal properties of (Cr,Mn)₂AlC solid solutions. Advances in Applied Ceramics, 2017, 116(3): 165~172

29.   Li S B, Zhang L Q, Yu W B, Zhou Y. Precipitation induced crack healing in a Ti₂SnC ceramic in vacuum. Ceram Int. 2017, 43: 6963~6966

30.   Jiang Jipeng, Li Shibo, Li Haolin, Zhou Yang. Effect of in situ formed TiC_x grains on the microstructural modification of high chromium white iron. Journal of Alloys and Compounds, 2017, 726: 430~436

31.   Zhang Linquan, Li Shibo, Chen Xiaodong, Zhou Yang. Abnormal thermal shock behavior in electrical conductivity of Ti₂SnC. Progress in Natural Science: Materials International, 2017, 27(4): 527~530

2016年

32.   Li Hai-Yan, Zhou Yang*, Cui Ao, Zheng Yong, Huang Zhen-Ying, Zhai Hong-Xiang and Li Shi-Bo. Ti₃SiC₂ Reinforced ZA27 Alloy Composites with Enhanced Mechanical Properties. Int. J. Appl. Ceram. Technol., 2016, 13 (4): 636~643 (SCI, WOS: 000379945900003)

33.   李海燕, 周洋*, 路金蓉, 郑涌, 陈晨, 李世波, 黄振莺, 李翠伟, 翟洪祥. 烧结温度对Ti₃AlC₂/ ZA27复合材料性能的影响. 稀有金属材料与工程, 2016, 45 (1): 212~216 (SCI, WOS: 000369551100042)

34.   Li Shibo, Bei Guoping, Chen Xiaodong, Zhang Linquan, Zhou Yang, Mackovic Mirza, Spiecker Erdmann, Greil Peter. Crack healing induced electrical and mechanical properties recovery in a Ti₂SnC ceramic. Journal of the European Ceramic Society, 2016, 36 (1): 25~32

35.   Li Haolin, Li Shibo, Zhang Linquan, Zhou Yang. Synthesis and ultra-high temperature ablation behavior of a ZrC/Cr₂AlC composite. Ceramics International, 2016, 42 (5): 5686~5692

36.   Li Haolin, Li Shibo, Du Xuesong, Bao Peiwei, Zhou Yang. Thermal shock behavior of Cr2AlC in different quenching media. Materials Letters, 2016, 167(3): 131~133

2015年

37.   Li H-Y, Zhou Y*, Chen C, Zheng Y, Lu J-R, Li S-B and Huang Z-Y. Microstructure and mechanical properties of Zn based composites reinforced by Ti₃AlC₂. Advances in Applied Ceramics, 2015, 114 (6): 315~320 (SCI, WOS: 000357957700003)

38.   Lu J-R, Zhou Y*, Zheng Y, Li H-Y and Li S-B. Interface structure and wetting behavior of Cu/Ti₃SiC₂ system. Advances in Applied Ceramics, 2015, 114 (1): 39~44 (SCI, WOS: 000351083300007)

39.   Li Mengqi, Zhai Hongxiang, Huang Zhenying, Liu Xiaohan, Zhou Yang, Li Shibo, Li Cuiwei. Tensile behavior and strengthening mechanism in ultrafine TiC0.5 particle reinforced Cu–Al matrix composites. Journal of Alloys and Compounds, 2015, 628: 186~194

40.   Huang Zhenying, Xu Hao, Zhai Hongxiang, Wang Yazheng, Zhou Yang. Strengthening and tribological surface self-adaptability of Ti₃AlC₂ by incorporation of Sn to form Ti₃Al(Sn)C₂ solid solutions. Ceramics International, 2015, 41: 3701~3709

41.   Xu Hao, Huang Zhenying, Zhai Hongxiang, Li Mengqi, Liu Xiaohan, Zhou Yang. Fabrication, mechanical properties, and tribological behaviors of Ti₃Al_0.8Sn_0.4C₂ solid solution by two-time hot-pressing method. Int. J. Appl. Ceram. Technol., 2015, 12 (4): 783~789

2014年

42.   路金蓉, 周洋*, 李海燕, 郑涌, 李世波, 黄振莺. Cu/Ti₃SiC₂ 体系润湿性及润湿过程的研究. 无机材料学报, 2014, 29(12): 1313~1319 (SCI, WOS: 000348095600014)

43.   Li Shibo, Li Haolin, Zhou Yang, Zhai Hongxiang. Mechanism for abnormal thermal shock behaviour of Cr₂AlC. J Eur Ceram Soc, 2014, 34(5): 1083~1088

44.   Li Haolin, Li Shibo, Chen Xiaodong, Zhou Yang. Spontaneous pulverization of Al₄C₃ containing MAX bulk materials at room temperature. Advances in Applied Ceramics: Structural, Functional and Bioceramics, 2014, 113(3): 184~188

45.   Li Haolin, Li Shibo, Zhou Yang. Cyclic thermal shock behavior of a Cr₂AlC ceramic. Materials Science & Engineering A, 2014, 607: 525~529

46.   Huang Zhenying, Zhai Hongxiang, Li Mengqi, Liu Xiaohan, Zhou Yang. Friction behaviors and effects on current-carrying wear characteristics of bulk Ti₃AlC₂. Tribology Transactions, 2014, 57: 300~307

2013年

47.   Liu Q P, Zhou Y*, Duan Y D, Wang M, Lin Y. Improved photovoltaic performance of dye-sensitized solar cells(DSSC) by Zn+Mg co-doped TiO₂ electrode. Electrochimica Acta, 2013, 95: 48-53

48.   Liu Q P, Zhou Y*, Duan Y D, Wang M, Zhao X H, Lin Y. Enhanced conversion efficiency of dye-sensitized titanium dioxide solar cells by Ca-doping. Journal of Alloys And Compounds, 2013, 548: 161-165

49.   Li Shibo, Chen Xiaodong, Zhou Yang, Song Guiming. Influence of grain size on high temperature oxidation behavior of Cr₂AlC ceramics. Ceramics International, 2013, 39(3): 2715-2721

50.   Li Mengqi, Zhai Hongxiang, Huang Zhenying, Liu Xiaohan, Zhou Yang. Microstructure and mechanical properties of TiC_0.5 reinforced copper matrix composites. Materials Science and Engineering A, 2013, 588: 335-339

2012年

51.   Liu Q P, Huang H J，Zhou Y*, Duan Y D, Sun Q W, Lin Y. Photovoltaic Performance of DyeSensitized Solar Cells Based on Al-Doped TiO₂ Thin Films. Acta Physico-chimica sinica, 2012, 28(3): 591~595 

52.   Lu Jinrong, Zhou Yang, Zheng Yong, Li Shibo, Huang Zhenying and Zhai Hongxiang. Effects of Sintering Process on the Properties of Ti₃SiC₂/Cu Composite. Key Engineering Materials, 2012, 512-515: 377~381  (EI, Accession number: 20122615184786)

53.   Liu Qiuping, Zhou Yang, Huang Huijuan, Guo Quanjiang, Zhao Xianhui and Lin Yuan. Charge transmission and recombination in the dye- sensitized solar cells based on Mn-doped TiO₂ thin films. Key Engineering Materials, 2012, 519: 53~56

54.   Li Shibo, Song Gui-Ming and Zhou Yang. A dense and fine-grained SiC/Ti₃Si(Al)C₂ composite and its high-temperature oxidation behavior. Journal of the European Ceramic Society, 32 (2012) 3435~3444

2011年

55.   Liu Qiuping, Zhou Yang, Duan Yandong, Lin Yuan. Zinc-doping in TiO₂ films to enhance photovoltaic performance of Dye-sensitized solar cells. Applied mechanics and materials. 2011, 66-68: 224-228

56.   孙建军, 周洋, 路金蓉, 李世波, 黄振莺, 翟洪祥. Ti₃SiC₂/Cu复合材料的制备与性能. 粉末冶金材料科学与工程, 2011,16 (4): 587~590

57.   路金蓉, 周洋, 孙建军, 李世波, 黄振莺, 翟洪祥. 高纯Ti₃SiC₂的合成及其反应机理, 机械工程材料, 2011, 11: 51~53+108

2010年

58.   周洋, 蒋三生, 李世波, 李翠伟, 张志力, 黄振莺, 翟洪祥. (2010): 反应烧结Si₃N₄透波陶瓷的制备与性能研究. 材料工程, 2010（增刊2）: 208~210

59.   路金蓉, 周洋, 孙建军, 李世波, 黄振莺, 翟洪祥. (2010): 组分对Ti₃SiC₂/Cu复合材料性能的影响. 材料工程, 2010（增刊2）: 165~167

60.   颜世韬, 周洋, 邢希, 李世波, 翟洪祥. (2010): 钙钛矿型La_1-xB_xMnO₃(B=Sr, Ca)粉体及块体材料的制备研究. 材料工程, 2010（增刊2）: 17~19

61.   陈树涛, 周洋, 颜世韬, 赵鸿滨, 李世波, 翟洪祥. La_0.875Sr_0.125MnO₃粉体及块体的制备与性能研究. 2010中国材料研讨会论文集, 长沙, 2010.6: 123~129

62.   Zhang Hong-Bing, Zhai Hong-Xiang, Zhou Yang, Huang Zhen-Ying. Densifying Ti₃AlC₂/Cu composites using a cold-extruding and temper means. Advanced Materials Research, 2010, 105-106: 87-89

63.   Chen Xinhua, Zhai Hongxiang, Li Shibo, Zhou Yang, Huang Zhenying, 2010, Preparation of bulk Ti₂AlC using Ti₃AlC₂ powders as a starting material, 6th China International Conference on High-Performance Ceramics, CICC-6, 2009/8/16-2009/8/19, pp 83-86

1. 周洋. 层状陶瓷复合材料技术研究. 益小苏主编, 先进复合材料技术研究与发展, 国防工业出版社, 北京, 2006: 385~394
2. 周洋. 层状陶瓷复合材料. 师昌绪, 李恒德, 周廉主编, 材料科学与工程手册 (下卷), 化学工业出版社, 北京, 2004: 9-66~9-71
3. 周洋, 吴学仁, 方岱宁, 郑泉水, 颜悦, 魏悦广. 典型先进材料的强韧化设计与实现. 黄克智, 王自强主编, 材料的宏微观力学与强韧化设计, 清华大学出版社, 北京, 2003: 246~285

2008年获教育部技术发明二等奖；

2011年获中国专利优秀奖；

2016年获北京市科学技术二等奖。