惠卫军

多年来共主持和主要参加了国家973计划、国家863计划、国家自然科学基金项目、国家科技攻关/支撑计划、国家重点研发计划、国家军工配套材料等国家级、省部级和企业技术服务项目上百项，主要包括：

1. 国家973计划课题：长疲劳寿命机械制造用高强度钢的研究，2004-01-01--2009-12-31，536万元，主持

2. 国家973计划课题：1500MPa级合金结构钢的基础研究，1999-01-01--2003-12-31，502万元，主持

3. 国家863计划项目：定制钢材与锻件一体化技术，2013-01-01--2015-12-31，364万元，主持

4. 国家863计划项目：乘用车用热成型马氏体钢板关键技术研究，2009-08-01--2011-12-31，1000万元，主持

5. 国家科技支撑计划项目：节能微合金非调质钢棒材关键技术开发，2007-09-01--2010-12-31，659万元，主持

6. 国家科技攻关计划项目：重载用非调质钢技术开发，2004-01-01--2006-03-31，200万元，主持

7. 国家科技攻关技术项目：新一代高强度螺栓钢研究与开发，2002-01-01--2004-12-31，190万元，主持

8. 国家军工配套科研项目：XX专用基础XXX用钢的升级换代，2012-01-01--2014-06-31，339万元，主持

    

   2013年9月调入北京交通大学以后主持和主要参加的主要科研项目如下：

1. 企业技术服务：马钢动车组车轴用钢疲劳性能及热处理工艺优化研究，2013-10-01--2014-12-31，50.0万元，主持

2. 基本科研业务费：铌在高强度紧固件用钢中应用的基础研究，2014-01-01--2015-12-31，8.0万元，参加

3. 企业技术服务：高性能锯片用钢组织性能分析及基础数据库建设，2014-04-01—2016.03.31，50.0万元，主持

4. 基本科研经费：逆转变奥氏体对中锰钢氢致延迟断裂行为的影响，2014-04-01—2016.03.31, 20.0万元，主持

5. 安徽省科技计划：轨道交通移动装备用高强高韧紧固件研究开发，2013-09-01—2015-12-31, 50.0万元，主持 

6.  企业技术服务：马钢重载车轴用钢疲劳性能检测分析等，2014-08-01—2015-12-31，83.5万元，主持

7. 企业技术服务：定制锻件用非调质钢组织性能调控技术研究，2015-02-01--2016-12-31, 40万元，主持  

8. 企业技术服务：马钢时速350km动车组车轴用钢疲劳性能及氢脆敏感性研究, 2015-09-03--2016-12-31, 60万元，主持

9. 国防973计划项目：XX钢的高洁净度冶炼与性能精细调控, 2015-01-01--2019-12-31, 224万元，主持  

10. 国家重点研发计划项目：低成本高强韧非调质钢关键技术开发与应用，2016-07-01-2020-12-31, 345万元，主持

11. 国家重点研发计划项目：海水淡化关键设备用新材料开发与应用，2016-07-01-2021-06-01, 110万元，参加  

12. 国家重点研发计划项目：材料基因工程—高端装备典型构件用特殊钢的示范应用研究，2017-07-2021-06,155万元，主持  

13. 国家重点研发计划项目：高铁车轴用钢低温韧化及长疲劳寿命化机理研究，2017-07-2021-06，50万元，参加  

14. 国家重点研发计划项目：耐候桥梁钢耐蚀机理及服役性能研究，2017-07-2021-06，29万元，参加

15. 国家自然科学基金(面上项目)：基于组织调控的高强度螺栓钢氢致延迟断裂行为研究(52071010)，2021.01~2024.12, 58万元，主持

16. 国家自然科学基金(面上项目)：耐蚀性与氢陷阱协同调控的高强度紧固件用钢延迟断裂行为研究(52271086), 2023.01~2026.12, 70万元，主持
    

    在国内外核心刊物上累计发表学术论文270篇，其中SCI收录论文101篇，EI收录论文94篇。

1. Hui Weijun, Nie Yihong, Dong Han, Weng Yuqing, Wang Chunxu. High-cycle Fatigue Fracture Behavior of Ultrahigh Strength Steels[J]. J Mater Sci Tech, 2008, 24(5): 787-792 [SCI]

2. HUI W J, DONG H, WENG Y Q, SHI J. Delayed Fracture Behavior of CrMo -Type High Strength Steel Containing Titanium[J]. J. of Iron & Steel Research Inter., 2005, 12(1): 43-49 [SCI]

3. 惠卫军，田 鹏，董 瀚，苏世怀，于同仁，张步海，翁宇庆. 形变温度对中碳钢组织转变的影响[J]. 金属学报，2005, 41(6):611-616 [SCI,EI]

4. 惠卫军，董瀚，翁宇庆，时  捷，聂义宏，褚作明，陈蕴博. 超细晶粒高强度钢的延迟断裂行为[J]. 金属学报，2004，40(6):561-568 [SCI,EI]

5. 惠卫军，董 瀚，翁宇庆，时 捷，章晓中. Mo对高强度钢延迟断裂行为的影响[J]. 金属学报，2004, 40(12):1274-1280 [SCI,EI]

6. HUI Wei-jun, DONG Han, WENG Yu-qing. Delayed Fracture Behavior of CrMo Type High Strength Steel Containing Vanadium[J]. J. of Iron and Steel Research Inter., 2003, 10(4):63-67 [SCI]

7. 惠卫军，董 瀚，翁宇庆，王毛球，陈思联，时 捷. 回火温度对Cr-Mo-V系高强度钢力学性能的影响[J]. 金属学报，2002, 38(10):1009-1014 [SCI,EI]

8. HUI Wei-jun, DONG Han, WENG Yu-qing, CHEN Si-lian，WANG Mao-qiu. 1300MPa Grade High Strength Steel for Bolt with Superior Delayed Fracture Resistance[J]. Journal of Iron and Steel Research International. 2002, 9(1):40-45[SCI]

9. 惠卫军，聂义宏，付书红，董 瀚，翁宇庆. Cr-Mo-V系高强度钢的疲劳断裂行为[J]. 材料热处理学报, 2007, 28(5): 37-41[EI]

10. 惠卫军，董 瀚，翁宇庆，王毛球，时 捷. Cr-Mo-V系高强度钢的应力腐蚀开裂行为[J]. 材料热处理学报，2006, 27(6):37-42[EI]

11. 惠卫军，董 瀚，翁宇庆. 42CrMoVNb细晶高强度钢的力学行为[J]. 材料热处理学报，2005，26(5):57-61 [EI]

12. 张永健，惠卫军，董 瀚. 一种低碳Mn-B系超高强度钢板热成形后的氢致延迟断裂行为[J]. 金属学报，2013, 49(10):1153-1159 [SCI, EI]

13. Zhou C, Zhang Y J, Hui W J, Wang L. The relationship between hydrogen and GBF zone in the very high cycle fatigue[J]. Journal of Iron and Steel Research International, 2013, 20(12): 91-96 [SCI]

14. Zhou Chao, Wang Mao qiu, Hui Wei jun, Wang Lei, Wu Run. Rotating bending fatigue properties of two case hardening steels after nitriding treatment[J]. Materials and Design, 2013, 46: 539–545 [SCI]

15. 李 阳，张永健，惠卫军，王毛球，董 瀚. 1500 MPa级高强度钢42CrMoVNb的氢吸附行为[J]. 金属学报, 2011, 47(4):423-428 [SCI,EI]

16. Y.H. Nie, W.T. Fu, W.J. Hui, H. Dong, Y.Q. Weng. Very high cycle fatigue behavior of 2000-MPa ultra-high strength spring steel with bainite-martensite duplex microstructure[J]. Fatigue Fract Engng Mater Struct, 2009, 32:189-196 [SCI]

17. 张永健，惠卫军，项金钟，董 瀚，翁宇庆. 晶粒尺寸对42CrMoVNb钢超高周疲劳性能的影响[J]. 金属学报，2009, 45(7):880-886 [SCI,EI]

18. 查小琴，惠卫军，雍岐龙，董 瀚，翁宇庆，龙晋明. 钒对中碳非调质钢疲劳性能的影响[J]. 金属学报，2007, 43(7): 719-723 [SCI,EI]

19. Zhang Ying-jian,Hui Wei-jun,Dong Han. Hot forging simulation analysis and application of microalloyed steel crankshaft[J]. Journal of Iron and Steel Research International, 2007,14:189-195 [SCI]

20. 聂义宏，惠卫军，傅万堂，翁宇庆，董 瀚. 中碳高强度弹簧钢NHS1超高周疲劳破坏行为[J]. 金属学报，2007, 43(10):1031-1036 [SCI,EI]

21. NIE Yi-hong, HUI Wei-jun, FU Wan-tang, WENG Yu-qing. Effect of boron on delayed fracture resistance of medium-carbon high strength spring steel[J]. J. Iron & Steel Res., Int., 2007, 14(6):53-57,67[SCI]

22. 张永健，周 超，惠卫军，陈思联，董 瀚. 一种低碳Mn-B系超高强度钢板的氢致延迟断裂行为[J]. 材料热处理学报，2013, 34(10):96-102[EI]

23. 杨金峰，惠卫军，龙晋明，于同仁，孙维. 变形量对贝氏体型冷作强化非调质钢力学性能的影响. 材料热处理学报，2011, 33(8):90-95[EI]

24. 查晓琴，惠卫军，雍歧龙. 铁素体-珠光体型非调质钢的高周疲劳破坏行为. 材料研究学报，2008，22(6): 634-638 [EI]

25. 聂义宏，惠卫军，傅万堂，翁宇庆. 洁净度对42CrMo钢疲劳破坏行为的影响[J]. 材料研究学报，2007, 21: 123-128 [EI]

26. 班丽丽，惠卫军，雍岐龙，翁宇庆. 残余奥氏体对中碳TRIP钢疲劳性能的影响[J]. 材料研究学报，2007, 21: 196-200 [EI]

27. 田  鹏，惠卫军，刘荣佩，张步海，于同仁，苏世怀. 形变参数对中碳钢组织演变的影响. 材料热处理学报，2005, 26(4):69-73 [EI]

28. HUI W J, DONG H, CHEN S L, WANG M Q, WENG Y Q. Effect of Prior Austenite Grain Size on the Delayed Fracture Resistance of High Strength Steel, International Symposium on Ultrafine Grained Steels(ISUGS2001)，Uminonakamichi, Fukuoka, Japan, pp.232-235, 2001.

29. HUI Weijun, DONG Han, WENG Yuqing, TIAN Peng, SU Shihuai, YU Tingren, ZHANG Buhai. Effect of Controlled Rolling and Cooling on Spheroidization of Medium Carbon Steel. Proceedings of Second International Conference on Advanced Structural Steels(ICASS 2004), Shanghai, China, pp.689-694, 2004.

30. W Hui, H Dong, X Zhao, Y Weng. Research and development of high strength steels with excellent fatigue failure resistance[CD]. 2^nd International conference Super-High Strength Steels. Peschiera del Garda, Italy, 2010 [Plenary].

31. Weijun Hui, Han Dong, Yuqing Weng, Jie Shi, Maoqiu Wang. Long life high strength steels to resist fatigue failure and delayed fracture. Advanced Steels-The Recent Scenario in Steel Science and Technology, Yuqing Weng, Han Dong and Yong Gan eds, Metallurgical Industry Press and Springer, pp.137-159, 2011.

32. Weijun Hui, Silian Chen, Yongjian Zhang, Chengwei Shao, Han Dong. Effect of Vanadium on the High-cycle Fatigue Fracture Properties of Medium-carbon Microalloyed Steel for Fracture Splitting Connecting Rod. Materials and Design, 2015, 66:227-234 [SCI, An2]

33. Weijun Hui, Yongjian Zhang, Chengwei Shao, Silian Chen, Xiaoli Zhao, Han Dong. Microstructural effects on high-cycle fatigue properties of microalloyed steel 38MnVS. Mater Sci Eng A, 2015, 640(7):147-153 [SCI, An2]

34. Weijun Hui, Silian Chen, Chengwei Shao, Yongjian Zhang, Han Dong. Hot Deformation Behavior of Vanadium-microalloyed Medium-carbon Steel for Fracture Splitting Connecting Rod. J of Iron and Steel Research International, 2015, 22(7):615-621 [SCI, An3]

35. Weijun Hui, Yongjian Zhang, Xiaoli Zhao, Chao Zhou, Kaizhong Wang, Wei Sun, Han Dong. Very high cycle fatigue properties of Cr-Mo low alloy steel containing V-rich MC type carbides. Mater Sci Eng A, 2016, 651(1):311-320 [SCI, An2, An2]

36. Weijun Hui, Yongjian Zhang, Xiaoli Zhao, Chengwei Shao, Kaizhong Wang, Wei Sun, Tongren Yu. Influence of cold deformation and annealing on hydrogen embrittlement of cold hardening bainitic steel for high strength bolts. Mater Sci Eng A, 2016, 662:528-536 [SCI, An2]

37. Weijun Hui, Yongjian Zhang, Chengwei Shao, Silian Chen, Xiaoli Zhao, Han Dong. Enhancing the mechanical properties of vanadium-microalloyed medium carbon steel by optimizing post-forging cooling conditions. Materials and Manufacturing Processes, 2016, 31:770-775 [SCI, An3]

38. Weijun Hui, Chengwei Shao, Yongjian Zhang, Silian Chen, Xiaoli Zhao, Han Dong. Influence of vanadium on fracture splitting property of medium carbon steel. Journal of Iron and Steel Research International, 2016; 23(5); 475-483. [SCI, An3]
39. Weijun Hui, Yongjian Zhang, Chengwei Shao, Silian Chen, Xiaoli Zhao, Han Dong. Effect of cooling rate and vanadium content on the microstructure and hardness of medium carbon forging steel. Journal of Materials Science & Technology, 2016; 32:545-551 [SCI, An2]

40. Weijun Hui, Yongjian Zhang,Xiaoli Zhao, Na Xiao, Fangzhong Hu. High cycle fatigue behavior of V-microalloyed medium carbon steels: a comparison between bainitic and ferritic-pearlitic microstructures. International Journal of Fatigue, 2016; 91(10):232-242 [SCI, An2]

41. Weijun Hui, Chao Zhou, Yongjian Zhang, Xiaoli Zhao, Han Dong. Very high cycle fatigue properties of high strength spring steel 60SiCrV7. Fatigue& Fracture of Engineering Materials & Structures, 2016; 39(9):1081-1091 [SCI, An3]

42. Weijun Hui, Haixu Zhang, Yongjian Zhang, Xiaoli Zhao, Chengwei Shao. Effect of nickel on hydrogen embrittlement behavior of medium-carbon high strength steels. Materials Science & Engineering A; 2016; 674: 615-625 [SCI, An2]

43. 巫宇峰，惠卫军，陈思联，雍岐龙，曹磊，赵馨月. 不同钒含量中碳非调质钢的奥氏体晶粒长大行为. 材料热处理学报，2016, 37(1): 99-105 [EI]

44. 巫宇峰，惠卫军，陈思联，徐乐，雍岐龙，周世同. 钒对中碳非调质钢组织性能的影响. 钢铁研究学报，2016, 28(11): 56-62,73

45. Weijun Hui, Zhibao Xu, Yongjian Zhang, Xiaoli Zhao, Chengwei Shao, Yuqing Weng. Hydrogen embrittlement behavior of high strength rail steels: A comparison between pearlitic and bainitic microstructures. Materials Science & Engineering A, 2017; 704(9):199-206 [SCI,An2]

46. Weijun Hui, Chengwei Shao, Yongjian Zhang, Xiaoli Zhao, Yuqing Weng. Microstructure and mechanical properties of medium Mn steel containing 3%Al processed by warm rolling. Materials Science & Engineering A, 2017; 707(11):501-510 [SCI, An2]

47. Weijun Hui, Na Xiao, Xiaoli Zhao, Yongjian Zhang, Yufeng Wu. Effect of vanadium on dynamic continuous cooling transformation behavior of medium-carbon forging steels. Journal of Iron and Steel Research International, 2017;24(6):641-648 [SCI, An4]

48. Zhibao Xu, Weijun Hui, Zhanhua Wang, Yongjian Zhang, Xiaoli Zhao, Xiuming Zhao. Mechanical properties of a microalloyed bainitic steel after hot forging and tempering. Journal of Iron and Steel Research International, 2017; 24(11):1085-1094 [SCI, An4]

49. Xiaoli Zhao, Yongjian Zhang, Chengwei Shao, Weijun Hui, Han Dong. Thermal Stability of Retained Austenite and Mechanical Properties of Medium-Mn Steel during Tempering Treatment. Journal of Iron and Steel Research International, 2017; 24(8):830-837 [SCI, An4]

50. Chengwen Shao, Weijun Hui, Yongjian Zhang, Xiaoli Zhao, Yuqing Weng. Microstructure and mechanical properties of hot-rolled medium-Mn steel containing 3% aliminum. Materials Science & Engineering A, 2017; 682(1): 45-53 [SCI, An2]

51. Chengwei Shao, Weijun Hui, Yongjian Zhang, Xiaoli Zhao, Yuqing Weng. Effect of intercritical annealing time on hydrogen embrittlement of warm-rolled medium Mn steel. Materials Science & Engineering A, 2018; 726(5):320-331 [SCI, An2]

52. 赵晓丽，张永健，邵成伟，惠卫军，董瀚. 两相区退火处理冷轧0.1C-5Mn中锰钢的氢脆敏感性. 金属学报，2018; 54(7):1031-1041[SCI, An4]

53. 赵晓丽，张永健，黄海涛，惠卫军，王存宇，董瀚. 温轧及逆转变退火对中锰钢组织和力学性能的影响. 钢铁研究学报, 2018, 30(8):642-649
54. 赵晓丽，张永健，黄海涛，惠卫军，董瀚. 回火对冷轧后退火处理中锰钢0.1-5Mn氢脆敏感性的影响. 材料热处理学报, 2018, 39(10):36-45.
55. 刘湘江，赵晓丽，惠卫军. 含Ni高强度螺栓钢氢致延迟断裂行为研究. 上海金属, 2018, 40(4):40-46
56. Yongjian Zhang, Zhibao Xu, Xiaoli Zhao, Guhui Gao, Weijun Hui, Yuqing Weng. Hydrogen embrittlement behavior of high strength bainitic rail steel: effect of tempering treatment. Engineering Failure Analysis, 2018; 93(11):100-110 [SCI, An3]
57. Yongjian Zhang, Weijun Hui, Xiaoli Zhao, Cunyu Wang, Han Dong. Effects of Hot Stamping and Tempering on Hydrogen Embrittlement of a Low-Carbon Boron-Alloyed Steel, Materials, 2018, 11(12), 2507 (doi:10.3390/ma11122507) [SCI,An3]
58. Yongjian Zhang, Weijun Hui, Xiaoli Zhao, Cunyu Wang, Wenquan Cao, Han Dong. Effect of reverted austenite fraction on hydrogen embrittlement of TRIP-aided medium Mn steel (0.1C-5Mn). Engineering Failure Analysis, 2019, 97(3):605-616 [SCI, An3]
59. Yongjian Zhang, Weijun Hui, Jiaojiao Wang, Ming Lei, Xiaoli Zhao. Enhancing the resistance to hydrogen embrittlement of Al-containing medium-Mn steel through heavy warm rolling. Scritpa Materialia, 2019, 165(5): 15-19[SCI, An1]
60. 邵成伟，惠卫军，张永健，赵晓丽，翁宇庆. 一种新型高强度高塑性冷轧中锰钢的组织和力学性能. 金属学报，2019, 55(2):191-201 [SCI, An4]
61. Yongjian Zhang, Weijun Hui, Jiaojiao Wang, Chengwei Shao, Xiaoli Zhao. Enhancing the mechanical properties of Al-containing medium Mn steel through warm rolling and intercritical annealing. Steel Research International, 2019, 90(3):1800412 [SCI, An3]
62. Yongjian Zhang, Chengwei Shao, JiaoJiao Wang, Xiaoli Zhao, Weijun Hui. Intercritical annealing temperature dependence of hydrogen embrittlement behavior of cold-rolled Al-containing medium-Mn steel. International Journal of Hydrogen Energy, 2019, 44(8):22355-22367 [SCI, An3]
63. 王占花，惠卫军，张永健，张念，郑文超. 硫化物形貌对非调质钢力学性能各向异性的影响. 钢铁研究学报,2019, 31(3): 327-335
64. 王占花，惠卫军，张永健，郝彦英，戴观文. 控轧控冷中碳非调质钢的高周疲劳性能. 钢铁, 2019, 54(3): 69-75
65. Na Xiao, Weijun Hui, Yongjian Zhang, Xiaoli Zhao, Ying Chen, Han Dong. High-Cycle Fatigue Behavior of Vacuum-Carburized 20Cr2Ni4 Steel with Different Case Depths. Journal of Materials Engineering and Performance, 2019, 28(6): 3413-3422 [SCI, An3]
66. Weijun Hui, Zhanhua Wang, Zhibao Xu, Yongjian Zhang, Xiaoli Zhao. Hydrogen embrittlement of a microalloyed bainitic forging steel. Journal of Iron and Steel Research International, 2019, 26(9): 1011-1021[SCI, An3]
67. 赵晓丽，张永健，惠卫军，王存宇，董 瀚. 不同轧制及退火处理0.1C-5Mn中锰钢的氢敏感性. 钢铁，2019, 54(11): 69-79
68. 赵晓丽，张永健，惠卫军，王存宇，董 瀚. 不同处理状态下0.1C-5Mn中锰钢的氢脆敏感性. 钢铁研究学报, 2019, 31(9): 837-847
69. 崔友久，惠卫军，张永健，赵晓丽，张锦文，高建兵. 连铸与模铸高铁车轴钢的高周疲劳破坏行为. 中国冶金，2019, 29(12): 31-39
70. Yongjian Zhang, Jiaojiao Wang, Zhiqi Xie, Xiaoli Zhao, Weijun Hui. Microstructural characteristics and tensile behavior of a hot-rolled medium-Mn steel (0.25C-8.5Mn-0.5Si-2.5Al) processed by intercritical annealing treatment. Journal of Materials Engineering and Performance, 2020, 29(4): 2623-2634 [SCI, An4]
71. Zhanhua Wang, Weijun Hui, Zhen Chen, Yongjian Zhang, Xiaoli Zhao. Effect of vanadium on microstructure and mechanical properties of bainitic forging steel. Materials Science & Engineering A, 2020, 771: 138653 [SCI, An2]
72. Zhanhua Wang, Weijun Hui, Zhiqi Xie, Yongjian Zhang, Xiaoli Zhao. Enhancing mechanical properties of a V+Ti microalloyed bainitic forging steel via tailoring microstructure through controlled forging. Journal of Materials Science, 2020, 55(24): 10849-10862 [SCI, An3]
73. Na Xiao, Weijun Hui, Yongjian Zhang, Xiaoli Zhao, Ying Chen, Han Dong. High cycle fatigue behavior of a low carbon alloy steel: The influence of vacuum carburizing treatment. Engineering Failure Analysis, 2020, 109: 104215 [SCI, An3]
74. Ming Lei, Weijun Hui, JiaoJiao Wang, Yongjian Zhang, Xiaoli Zhao. Microstructure and mechanical properties of hot-rolled V-microalloyed Al-containing medium-Mn steel. Journal of Iron and Steel Research International, 2020, 27(5): 537-548 [SCI, An4]
75. Jiao-Jiao Wang, Wei-jun Hui, Zhi-qi Xie, Yong-jian Zhang, and Xiao-li Zhao. Influence of pre-strain on microstructural characteristics and tensile deformation behaviour of a cold-rolled Al-containing medium Mn steel. Journal of Materials Science, 2020, 55(12): 5296-5310 [SCI, An3]
76. JiaoJiao Wang, Weijun Hui, Zhiqi Xie, Zhanhua Wang, Yongjian Zhang, Xiaoli Zhao. Hydrogen embrittlement of a cold-rolled Al-containing medium-Mn steel: Effect of pre-strain. International Journal of Hydrogen Energy, 2020, 45(41): 22080-22093 [SCI, An3]
77. 邵成伟，王俊涛，赵晓丽，惠卫军. 两相区退火处理含铝中锰钢的组织和力学性能. 钢铁, 2020, 55(5): 87-93
78. 陈 桢，惠卫军，王占花，张 念，郝彦英. 两种不同碳含量铁素体+珠光体型非调质钢的缺口高周疲劳破坏行为，材料热处理学报，2020, 41(4):135-143
79. 陈 桢，惠卫军，王占花，张 念，郑文超. 不同硫化物形态中碳非调质43MnS钢连杆的组织与性能. 金属热处理, 2020, 45(7):124-130
80. 刘湘江，陈 桢，惠卫军. 38MnVS非调质钢的缺口高周疲劳破坏行为. 钢铁，2020, 55(7): 106-112
81. 王占花，惠卫军，陈 桢，张永健，赵晓丽. 钒及奥氏体化温度对Mn-Cr系贝氏体型非调质钢过冷奥氏体连续冷却转变行为的影响. 材料导报，2020, 34(9):18145-18151,18158 [EI]
82. 肖娜，惠卫军，张永健，赵晓丽，陈 鹰. 高洁净度齿轮钢中非金属夹杂物检测方法研究.工程科学学报，2020，42(7): 912-921 [EI]
83. 王占华，惠卫军，谢志奇，张永健，赵晓丽. 回火对钒钛微合金化Mn-Cr系贝氏体型非调质钢组织和性能的影响. 金属学报, 2020, 56(11):1441-1451 [SCI, An4]
84. Xiaoli Zhao, Yongjian Zhang, Weijun Hui*, Chengwei Shao, Cunyu Wang, Han Dong. The potential significance of tempering treatment in alleviating the hydrogen embrittlement susceptibility of a hot-rolled and intercritically annealed medium-Mn steel. Engineering Failure Analysis, 2021, 119: 104969 [SCI, An3]
85. Sixin Zhao, Dajiang Yu, Weijun Hui. High-cycle fatigue properties of ferritic-pearlitic medium-carbon forging steels with smooth and notched specimens. Journal of Materials Engineering and Performance, 2021, 30(3): 2182-2192 [SCI]
86. 肖 娜，惠卫军，张永健，赵晓丽.真空渗碳处理齿轮钢的氢脆敏感性.金属学报, 2021, 57(8): 977-988 [SCI]
87. Zhiqi Xie, Weijun Hui*, Yongjian Zhang, Xiaoli Zhao. Effect of Cu and solid solution temperature on microstructure and mechanical properties of Fe-Mn-Al-C low-density steels. Journal of Materials Research and Technology, 2022, 18(5-6): 1307-1321 [SCI, An1, top]
88. Zhiqi Xie, Weijun Hui*,Yongjian Zhang, Xiaoli Zhao, Saiyihan Bai. Achieving ultra-high yield strength in austenitic low-density steel via drastic VC precipitation. Materials Science & Engineering A, 2022, 861: 144306 [SCI, IF6.044, An1, top]
89. Chengxiang Zhang, Weijun Hui*, Xiaoli Zhao, Yongjian Zhang, Xiuming Zhao. The potential significance of microalloying with Nb in enhancing the resistance to hydrogen-induced delayed fracture of 1300-MPa-grade high-strength bolt steel. Engineering Failure Analysis, 2022, 135: 106144 [SCI, An2]
    
90. Chengxiang Zhang, Weijun Hui*, Xiaoli Zhao, Yongjian Zhang, Xiuming Zhao. Hydrogen-induced delayed fracture behaviour of V+Nb-microalloyed high-strength bolt steel with internal and environmental hydrogen. Corrosion Science, 2022, 209(12):110710 [SCI, An1, top]
91. Bin Liu, Weijun Hui*, Zhiqi Xie, Yongjian Zhang, Xiaoli Zhao. Effect of vanadium on fatigue performance of a bainitic forging steel. International Journal of Fatigue, 2023, 167(2): 107398 [SCI, An1, top]
92. Qu Zeng, Weijun Hui*, Yongjian Zhang, Xiangjiang Liu, Zan Yao. Very high-cycle fatigue performance of high carbon-chromium bearing steels with different metallurgical qualities. International Journal of Fatigue, 2023, 172(7): 107632 [SCI, An1, top]
    
93. Zhiqi Xie, Weijun Hui*, Saiyihan Bai, Yongjian Zhang, Xiaoli Zhao. Impact toughness of Fe-Mn-Al-C austenitic low-density steel solution treated at different temperatures. Journal of Materials Science, 2023, 58(3):1415-1435 [SCI, An3]
94. Xiaoli Zhao, Chengxiang Zhang, Yongjian Zhang, Weijun Hui*, Xiuming Zhao. Hydrogen-induced delayed fracture of Cu-containing high-strength bolt steel. Journal of Iron and Steel Research International, 2023, 30(2):375-383 (SCI, An2)
    

1. 中国冶金科学技术一等奖(2012年，第1完成人)

2. 北京市科学技术一等奖(2008年，第13完成人)

3. 安徽省科技技术一等奖(2007年，第2完成人)

4. 中国冶金科学技术二等奖(2014年，第3完成人)

5. 中国冶金科学技术二等奖(2000年，第4完成人)

6. 中国冶金科学技术二等奖(2002年，第10完成人)

7. 安徽省科技技术二等奖(2011年，第7完成人)

8. 中国材料研究学会科学技术二等奖(2006年，第2完成人)

9. 中国汽车工业科学技术三等奖(2008年，第5完成人)

10. 中国冶金科学技术奖三等奖(2007年，第2完成人)

11. 北京市科技技术三等奖(2006年，第2完成人)

12. 中国钢研科技集团有限公司 首届劳动模范(2009年)

13. 中国金属学会 冶金青年科技奖(2008年)

14. 北京市 优秀青年工程师标兵(2004年)

15. 钢铁研究总院创收单项一等功(2002年)
    
16. 钢铁研究总院创收单项一等功(2003年)
    
17. 钢铁研究总院优秀员工(2004年)
    
18. 钢铁研究总院优秀员工标兵(2005年，共4位)
19. 中国钢研科技集团优秀团队(2007年)
    

20. 中国汽车工业科学技术三等奖(2016年，第5完成人)

21.  河北省科学技术奖三等奖(2016年，第3完成人)

22. 中国材料研究学会青年优秀论文奖(2004年)
    
23. 中国金属学会特殊钢分会优秀论文一等奖(2008年)
    
24. 中国钢铁工业协会钒业分会第四届含钒钢优秀论文奖(2019年)
25. 中国钢铁工业协会钒业分会第一届含钒钢优秀论文奖(2012年)
    

26. 中国冶金科学技术奖二等奖(2020年，第5完成人)

27. 中国钢结构协会科学技术奖一等奖(2020年，第14完成人)

28. 中国冶金科学技术奖一等奖(2022年，第3完成人)

29. 湖北省科学技术奖三等奖 (2022年，第2完成人)